Q: Will this work on a 2013 Wr450f?

Asked by: Wiz - 5/3/2016
No Answers have been submitted yet.

Q: Would the valve adaptor with the c clip fit my 2012 Kawasaki ninja 250r??..I am trying to put a left hand rear brake setup on it.

Asked by: Perry - 1/31/2017
No Answers have been submitted yet.

Q: This junction valve is for thumb brake application ? This fits NISSIN brake master cylinder ? Will it damage the master cylinder with long term use? What is the size of the port for this valve to fit correctly Thanks

Asked by: Phillip - 1/10/2019
No Answers have been submitted yet.

Q: How does foot pedal activation not just pressurize the master cylinder reservoir on the handle bar? Does this adapter have a check valve in it.

Asked by: Corey Anderson - 2/26/2019
No Answers have been submitted yet.

Q: Is there any issue (ie. leaking) putting brake master cylinder pressure through this low pressure junction?

Asked by: Corey - 3/28/2019
No Answers have been submitted yet.

Q: Will this fit the zx6r 03/04

Asked by: Christoffer Rohr - 3/26/2020
No Answers have been submitted yet.

Q: this will fit a 2009 kawasaki klx250s ??

Asked by: Carlos Manuel Rodriguez Ramirez - 4/17/2020
No Answers have been submitted yet.

Q: Hello will this item fit on 2018 Yamaha R1 master cylinder? I want to confirm before I place the order. Thank you

Asked by: Walter - 5/26/2020
No Answers have been submitted yet.

Q: Will this fit a wr125x rear master cylinder

Asked by: Chris - 7/27/2020
No Answers have been submitted yet.

Q: Is this available right now?

Asked by: Riley Knoerzer - 11/7/2020
No Answers have been submitted yet.

Q: Two months have passed. I want to receive it quickly. When can I get the order I ordered in September?

Asked by: Minhwan Jang - 11/1/2021
No Answers have been submitted yet.

Q: Will this part fit a 2017 Yamaha R6 rear brake master cylinder?

Asked by: Jay Tanner - 11/22/2021
No Answers have been submitted yet.

Q: Hi, i have bought this item. my order number is: AB-4883. Can i know if it have been shipped? what is the tracking number for it?

Asked by: Nguyen Tran - 12/13/2021
No Answers have been submitted yet.

Q: do you have stock for the below HoHey Stunt Handbrake Junction Valve Adapter (Cir Clip Style)

Asked by: justin - 12/29/2021
No Answers have been submitted yet.

Q: I have a 2020 ktm 390 duke. Does this item fit my bike? Kind regards, bas

Asked by: Bas - 1/31/2022
No Answers have been submitted yet.

Q: How much would delivery to the UK cost? Thank you

Asked by: Adrian Tyrrell - 2/5/2022
No Answers have been submitted yet.

Q: Do you have estimate of when the handbrake junction valve adapter will be back in stock?

Asked by: Eric Jaeger - 3/4/2022
No Answers have been submitted yet.

Q: Hello, I have a quick question. What is the diameter of the part of the valve that goes into the rear master cylinder? Thanks a lot

Asked by: Felix - 7/10/2022
No Answers have been submitted yet.