Dynojet Power Commander V

Using valuable knowledge learned from the Power Commander III, Dynojet introduces the more capable Power Commander V, a premier EFI tuning system. Retaining the famed user-friendliness of the III, the V features a smaller and more refined package and the ability to not only tune the fuel injection, but also the ignition timing giving you unparalleled access to performance enhancing possibilities for your bike. From simple corrections of off idle hiccups to extensive race level mods, the Dynojet Power Commander V is one of the best tuners out there.

• PC 5 offers reduced size from PC 3 USB (less than half of the size of PC 3)
• USB powered from computer (9 volt adapter is no longer needed for programming)
• 2 position map switching function built in (map switch not included)
• Gear/Speed input (allows for map adjustment based on gear and speed)
• Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
• With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables)
• Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes
• 10 throttle position columns (up from 9 on PCIIIusb)
• Enhanced ?accel pump? utility (increased adjustment and sensitivity ranges)